• Mirror frame decorative aluminum profile CNC deep processing manufacturer
Leave Your Message

Wholesale Price Aluminum Mirror Frame Profile for Decor Mirrors Pictures Paintings Metal Framed

Siver Thick Slat Anodize CNC OEM Deep Processing Aluminum Extrusted Profile

    AL73jProduct Description

    Package:Protect film for each profile, shrink film/Kraft paper exterior for each bundle or pack as customer request.
    FOB port: Foshan, Shenzhen, Guangzhou
    Delivery time: 15-20 days after receiving the deposite.
    Payment term: 30% deposite and 70% balance after the delivery
    Plenty of patterns and colors for your choice.
    Strict control for surface finish, very little scratch.
    Accurate mold as well as accurate size.
    Standard alloy composition

    AL73jGeneral Chemical Composition of Alloy

    Alloy

    6063(%)

    6061(%)

    6082(%)

    Silicon Si

    0.20~0.60

    0.40~0.80

    0.7~1.2

    Iron Fe

    0.35

    0.70

    0.5

    Copper Cu

    0.10

    0.15~0.40

    0.1

    Manganese Mn

    0.10

    0.15

    0.4~0.8

    Manganese Mg

    0.45~0.90

    0.18~1.2

    0.6~0.8

    Chromium Cr

    0.10

    0.04~0.35

    0.25

    Zine Zn

    0.10

    0.25

    0.2

    Titanium Ti

    0.10

    0.15

    0.1

    Others(each)

    0.05

    0.05

    0.05

    Others

    0.15

    0.15

    0.15

    Aluminum

    Remainder

    Remainder

    Remainder

    AL73jMechanical Properties of Sections under Room Temperature

    Alloy

    State

    Tensile strength test

    Hardness test

    Tensile strength Rm M pa

    Non-proportional Stretching Stress

    Stretching rate

    Pattern thickness

    HV

    HW

    Rp0.2Mpa

    (A50mm%)

    mm

    HV

    HW

    6063

    T4

    130

    75

    14

    -

    T5

    160

    110

    8

    0.8

    58

    8

    T6

    205

    180

    8

    -

    6061

    T4

    184

    110

    16

    -

    T6

    265

    245

    8

    -

    6082

    T4

    205

    110

    12

    -

    -6351

    T6

    290

    250

    6

    -

    AL73jFAQ

    Q1: What is aluminum extrusion, fabrication, and anodization?
    A: Aluminum Extrusion refers to a process of creating shapes with an aluminum billet or log by forcing it to flow through a shaped opening in a die. Aluminum can be extruded into standard shapes or specific designs depending on a customer’s preference.
    Aluminum Fabrication refers to building aluminum components by cutting, drilling, slotting, tapping,bending, CNC machining, mechanical assembly and welding.
    Aluminum Anodization is an electro-chemical process of coating aluminum with a thin layer of oxide to increase corrosion resistance and harden the surface.
    Aluminum also can be dyed with various anodizing colours,which in most widely used is Brone shades.
    Q2: What’s the thickness for anodizing? Can you do 15um?
    A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
    Q3: What color you can do for powder coating? The thickness for powder coat?
    A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
    Q4: What color you can do for wood grain?
    A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
    Q5: What’s the delivery time for samples and mass production?
    A: (1). 2-3 weeks to open the new moulds and make samples.
    (2). 3-4 weeks after receipt of deposit and confirmation of the order.
    • framed bathroom mirror (1)
    • framed bathroom mirror (2)
    • framed bathroom mirror (3)
    • framed bathroom mirror (4)

    Leave Your Message